Below are articles featured in both the print and online edition of Model Aviation. Select an article to read more.
Coupe d'Hiver
Image
Free Flight Sport By Don DeLoach | [email protected] As seen in the April 2023 issue of Model Aviation. IN THE LATE 1930S, French modelers realized that a smaller, more compact Rubber class was
Making Specialty Fasteners
Image
Make the hardware you need at home By Terry Dunn | [email protected] Photos by author As seen in the April 2023 issue of Model Aviation. Choosing the right fasteners can have a huge impact on the
Sliced-Rib Method of Building
Image
Strong, lightweight ribs that are beautiful and functional By Scott Copeland | [email protected] Photos courtesy of the author As seen in the April 2023 issue of Model Aviation. Light enough
Annual Inspections
Image
RC Jets By Jim Hiller | [email protected] As seen in the March 2023 issue of Model Aviation. HAVE YOU PERFORMED an annual inspection yet on your frequently flown models? It’s amazing the things
Are You Ready for Flying Season
Image
RC Scale By Stan Alexander | [email protected] As seen in the March 2023 issue of Model Aviation. IT’S SPRINGTIME ALREADY! At about this time, I usually start looking at items that can cause a
2022 F1D World Championship
Image
Back to the salt mines By David Lindley | [email protected] Photos courtesy of John Kagan, Michael Rose, and the author As seen in the March 2023 issue of Model Aviation. After the COVID
Spektrum iX14 Transmitter
Image
Experiences with an Android-based radio By Greg Gimlick | [email protected] Photos by the author As seen in the March 2023 issue of Model Aviation. [Editor’s Note: As we were going to press, an
Larry Kruse’s May Bee
Image
Golden Age racing via flat foam By Larry Kruse Photos by Harold Anderson and Larry Kruse As seen in the March 2023 issue of Model Aviation. Editor’s note: On August 2, 2021, AMA lost one of its
2022 F2D Money Nats
Image
Control Line Combat By Mark Rudner | [email protected] As seen in the March 2023 issue of Model Aviation. SPRING IS HERE for readers, but at the time of this writing, it’s early December 2022